Submerged arc welding (SAW) is a common arc welding process. SAW is normally operated in the automatic or mechanized mode, however, semi-automatic (hand-held) SAW guns with pressurized or gravity flux feed delivery are available.
The process is normally limited to the flat or horizontal-fillet welding positions (although horizontal groove position welds have been done with a special arrangement to support the flux).
Check to see more information about SSAW pipes:
SAW pipe is made of hot rolled coiled steel by automatic submerged arc weld under normal atmospheric temperature. All the pipes are produced according to API Spec 5L, GB/T9711.1, GB/T9711.2, ASTM A252-89 standard. These pipes mainly used in petroleum and natural gas industry to transport flammable and non-flammable liquid and steel construction.
- Size:
- (O.D×Wall Thickness)mm×Length(mm)
- 219-3200mm×5-30mm x 12000mm+500mm
- In addition to above specification, the pipes can be produced according to customer’s requirements.
Execute Standard:- ASTM A252-89 WELDE AND SEAMLESS STEEL PIPE PILES
- API SPEC 5L Specification for Line Pipe
- GB/T9711.1 Petroleum and natural gas industries—Steel pipe for pipelines—Technical delivery conditions
- SY/T5037 Spiral submerged arc welded pipe for low pressure liquid transportation
Material:- Q235-Q345, L175-L485, SS400, 16Mn, L290-L360
or according to the customer's requirements.
Mainly usage:- Spiral welded steel pipes are widely used in Oil, Natural Gas, Water and other flammable & nonflammable liquid conveyance and distribution pipelines, steel structures for construction and other general purposes by means of their wide size range.
- Pipe Coating: HDPE/ 3PE/ 3PP/ Pipe cement mortar lining
- Mill Test Certificate: EN 10204/3.1B
Third party inspection: SGS, BV, Lloyds etc.
Comments