Rare earth alloy wear-resistant tube

 The rare earth alloy wear- esistant pipe is used for pneumatic, pump slurry, etc. Rare earth alloy wear resistant pipe has the characteristics of fast velocity and high flow rate. The conveying medium temporarily continues to produce impact on the pipe wall, wear, corrosion and so on, which causes the pipe to become tired and gradually wear out.

Rare earth alloy wear - resistant tube is badly worn parts, such as pipe, elbow, reducer, and water intake place such as the model of integral casting, then mechanical processing method, especially the outer wear parts, especially in the elbow to the outer diameter change circle method is adopted to carry on the design, local thickening severe wear parts, but also according to various requirements, produce all kinds of irregular switch pipe fittings to meet the design requirements, straight tube is using centrifugal casting.Rare-earth wear-resistant alloy containing Cr, Ni, V, Mo, W, a variety of alloy element such as Cu, it not only has high hardness, but also has certain mechanical properties, at room temperature with good welding performance, and can be cut and the possibility of opening, also has certain corrosion resistance.

Property

• No.：ZG40CrNiMoMnSiRe
• Hardness：HTC≥40

使用温度℃	磨料磨损mg/g	硬度HRC	抗拉强度N/mm²	冲击韧性J/cm²
≤300	0.021	≥63	890	5
≤350	0.033	≥56	910	6
≤350	0.042	≥45	910	6
≤400	0.069	≥42	960	6
≤400	0.039	≥48	920	7
≤400	0.064	≥40	950	7
≤400	0.069	≥36	910	8
≤400	0.036	≥42	1040	8.5-10

Usage:

Rare earth alloy wear-resistant tube is used for conveying wear-resistant pipes such as power plant powder and ash, mine slag and non-ferrous metal coal extraction and slag discharge, shock resistance and wear resistance.

Note:

in addition to the specifications and model sizes provided in the table, various pipe lengths within 6m and 12m can also be provided according to the actual design requirements of the user's working conditions.

ND	O.D. (1)	O.D. (2)	Length (mm)	S	Reference weight (kgs)
DN80	80	105	3000	12.5	84
DN83	83	108	3000	12.5	87
DN100	100	125	6000	12.5	220
DN108	108	133	6000	12.5	240
DN125	125	150	6000	12.5	261
DN134	134	159	6000	12.5	267
DN150	150	175	6000	12.5	317
DN159	159	184	6000	12.5	326
DN175	179	205	6000	15	445
DN190	190	219	6000	15	450
DN197	197	230	6000	16.5	504
DN200	200	230	6000	15	508
DN219	219	249	6000	15	512
DN229	229	255	6000	15	553
DN239	239	273	6000	17	546
DN250	250	280	6000	15	580
DN254	254	284	6000	15	631
DN273	273	308	6000	17.5	726
DN290	290	325	6000	17.5	768
DN300	300	335	6000	17.5	860
DN342	342	377	6000	17.5	900
DN350	350	385	6000	17.5	1005
DN391	391	426	6000	17.5	1020
DN400	400	430	6000	17.5	1044
DN450	450	495	6000	22.5	1524
DN500	500	548	6000	24	1800

Rare earth alloy wear-resistant pipe Performance chart

No.	Mechanical property						Appication scope
	Yield strength ≥MPa	Strength of extension ≥MPa	Impact J/cm2	Temperature ℃	Abrasive wear mg/g	Hardness ≥HRC（≥HB）
1		790	11	1100	0.026	45	Apply to power plant, metallurgy, high anti-wear components ash pump impeller, sheath, collar, front and rear guard board and medium speed mill, E type mill, MPS roller set, bushing and no welding (flange, flexible connection) coal straight tube bending static abrasive wear components, etc.
2		810	9	1050	0.023	51
3		890	5	300	0.021	63
4		910	16	1050	0.033	(400)
5		920	6	530	0.042	52
6		940	10	400	0.069	42	Mill coal pulverizing system of steel used in power plant furnace tube, cone doors, coal feeding door, elbow, straight pipe, sieve plate, metallurgy of blast furnace lining board, teeth board and scraper, sludge scraper slag machine, chassis, chain and sprocket little impact resistant components, electric power, metallurgy, mining and other pipes.
7		730	100	750	0.091	(210)
8		680	90	760	0.096	(220)
9	450	690	5	1150	0.041	38
10	380	580	12	800	0.061	36
11	400	530	16	900	0.086	34
12	420	560	20	950	0.089	32
13		590	5	100	0.026	52	Is mainly used for mining lose slag and coal slag discharge, and power plants lose non-ferrous metal powder, ash discharge pipeline, such as large and medium-sized fork tube, straight tube bending, poor working conditions of wear resistant components can also be used for coal mill lining tile hammer, hammer rings, the coal gate, door, etc.Good mechanical and welding performance and wear resistance under impact condition.
14		610	5．5	960	0.024	50
15		580	4．5	980	0.091	(441)
16		1700	10	750	0.12	(300)
17		960	6	600	0.69	(460)
18		920	7	850	0.039	48
19		950	7．5	450	0.064	40

Rare earth alloy wear-resistant pipe Material composition table

No.

Steel grade

Chemical component

C

Mn

Si

Cr

Ni

Mo

W

V

Nb

Cu

Re

N

S

P

1

ZGCr20Mo3Ni3Re

2.50/ 3.0

1.50/ 2.0

0.80/ 1.20

18.0/ 23.0

2.50/ 3.0

√

1.20/ 1.50

√

≤0.06

≤0.06

2

ZGCr28Mo3Ni3Re

2.80/ 3.30

1.50/ 2.0

1.80/ 1.20

25.0/ 300

2.80/ 3.30

√

1.80/ 2.30

√

≤0.06

≤0.06

3

ZGCr15Mo3Re

2.60/ 3.20

1.20/ 1.60

1.0/ 1.50

12.0/ 16.0

√

2.50/ 3.0

1080/ 1.20

√

≤0.04

≤0.05

4

ZGCr25Ni4Si2Re

0.35/ 0.45

0.80/ 1.20

1.20/ 1.60

23.0/ 26.0

3.50/ 4.50

√

√

≤0.035

≤0.045

5

ZGCr15Mo2Re

1.80/ 2.20

0.80/ 1.20

1.0/ 1.50

14.0/ 18.0

√

2.0/ 2.50

0.80/ 1.20

√

≤0.04

≤0.05

6

ZG40CrMnMoNiSiRe

0.40/ 0.50

1.20/ 1.60

1.50/ 2.0

1.10/ 1.60

1.0/ 1.50

√

√

√

√

≤0.035

≤0.04

7

ZG40Cr5Ni3MoVWRe

0.35/ 0.45

0.80/ 1.2

1.20/ 1.60

23.0/ 26.0

2.50/ 3.50

√

√

√

√

≤0.045

≤0.055

8

ZG50Cr18Ni4MoVWCuRe

0.45/ 0.60

1.0/ 1.40

1.50/ 2.0

16.0/ 20.0

3.50/ 5.0

√

√

√

0.40/ 0.60

√

≤0.35

≤0.35

9

ZGCr25Ni2Mo2WVCuRe

0.40/ 0.60

0.80/ 1.20

1.20/ 1.60

23.0/ 26.0

1.50/ 2.50

√

√

√

0.20/ 0.40

√

≤0.035

≤0.035

10

ZG40Cr25Ni6MoWVCuRe

0.35/ 0.45

1.2/ 1.60

1.50/ 2.0

23.0/ 26.0

5.0/ 7.0

√

√

√

√

√

√

≤0.35

≤0.045

11

ZG90CrMn13MoSiVRe

0.40/ 1.30

11.0/ 14.0

0.30/ 0.80

√

√

≤0.04

≤0.04

12

ZGCrMu10MoSiVRe

1.0/ 1.20

8.0/ 11.0

0.30/ 0.80

√

√

≤0.04

≤0.04

13

ZGW5Cr4Re

2.50/ 3.50

1.5/ 1.0

0.50/ 1.0

35.0/ 4.50

√

√

≤0.10

≤0.15

14

ZGCr25MoRe

2.30/ 3.0

0.50/ 0.90

0.30/ 0.60

23.0/ 28.0

√

√

≤0.06

≤0.10

15

ZGCr15MoRe

3.0/ 3.50

≤1.0

0.15/ 1.0

15.0/ 18.60

2.80/ 3.30

√

≤0.06

≤0.10

16

ZG30CrMnSi

0.27/ 0.33

1.30/ 1.50

1.20/ 1.50

√

√

√

≤0.03

≤0.04

17

ZG40CrNiRe

0.28/ 0.43

1.10/ 1.40

0.80/ 1.0

√

√

√

≤0.06

≤0.10

18

ZG33Cr13Ni4Re

0.30/ 0.35

≤0.80

≤0.60

12.0/ 14.0

4.0/ 4.50

√

√

≤0.06

≤0.10

19

ZG40CrSiN

0.35/ 0.45

1.0/ 1.50

1.50/ 2.0

√

√

≤0.04

≤0.08

Note: All content in this article is for reference only.