Tubing used for mechanical and light gauge structural applications. This allows for more specific property uniformity throughout the tube compared to standard pipe or tube. While Mechanical tube can be produced to standard specifications when requested, it is often produced to “typical” properties that focus mainly on the yield strength for a precise size and wall thickness. In some applications with severe forming, yield strength may not even be specified and the mechanical tube is produced to be “fit for use”. Mechanical tubing encompasses a wide range of both structural and non-structural applications.
Production Standard, Grade, Steel No:
- DIN2391 St35St45St52
- ASTM A519 1010, 1020, 1025, 1035, 1045
- ASTM A513 1010, 1020, 1025, 1035, 1040
- EN10305-1 E215E235E355
At SunnySteel, we apply our metallurgical and production expertise to manufacture high-performance seamless mechanical tube products to meet your needs.
This includes carbon, alloy and even custom steel grades; annealed, normalized and tempered; stress relieved and stress free; and quench and tempered.
Seamless Steel Tubes for Mechanical and Automobile usage for Backbone of Automobile and rear axle tube, manufacturing and processing of precision equipments, instruments and apparatus.
Sunny Steel supply a 1/2 million foot inventory of carbon steel pressure tubing including boiler tubes, condenser tubes and heat exchanger tubes all made in the China.
Our carbon steel pressure tubing inventory is manufactured in accordance with ASME SA-178 A and/or ASME SA-214 in diameters of 3/4″ through 4”.
Application:
- Backbone of Automobile and rear axle tube
- Manufacturing and processing of precision equipments, instruments and apparatus
Delivery Condition: GBK, BKS, BK, BKW, NBK
- Inspection and Test:
- Chemical Composition, Mechanical Properties, Visual and Dimension Test, NDT, Grain Size Test
Surface treatment:- Oil-dip, Varnish, Shot Blasting
Grade and Chemical Composition (%)
| Grade | C | Mn | P≤ | S≤ | Si | Cr | Mo |
|---|---|---|---|---|---|---|---|
| 1010 | 0.08-0.13 | 0.30-0.60 | 0.04 | 0.05 | - | - | - |
| 1020 | 0.18-0.23 | 0.30-0.60 | 0.04 | 0.05 | - | - | - |
| 1045 | 0.43-0.50 | 0.60-0.90 | 0.04 | 0.05 | - | - | - |
| 4130 | 0.28-0.33 | 0.40-0.60 | 0.04 | 0.05 | 0.15-0.35 | 0.80-1.10 | 0.15-0.25 |
| 4140 | 0.38-0.43 | 0.75-1.00 | 0.04 | 0.05 | 0.15-0.35 | 0.80-1.10 | 0.15-0.25 |
Typical Mechanical Properties
-| Grade | Condition | Tensile strength | Yield stength | Elongation |
|---|---|---|---|---|
| Mpa(min) | Mpa(min) | %(min) | ||
| 1020 | CW | 414 | 483 | 5 |
| SR | 345 | 448 | 10 | |
| A | 193 | 331 | 30 | |
| N | 234 | 379 | 22 | |
| 1025 | CW | 448 | 517 | 5 |
| SR | 379 | 483 | 8 | |
| A | 207 | 365 | 25 | |
| N | 248 | 379 | 22 | |
| 4130 | SR | 586 | 724 | 10 |
| A | 379 | 517 | 30 | |
| N | 414 | 621 | 20 | |
| 4140 | SR | 689 | 855 | 10 |
| A | 414 | 552 | 25 | |
| N | 621 | 855 | 20 |
Size Range
Tubular products seamless mechanical tubing is furnished in both cold-drawn and hot finished form in a wide range of sizes, from 1.375″ to 7.750″ OD and from 0.188″ to 1.625″ wall thickness.
Minimum Quantities
- Hot-finished carbon and alloy—10,000 pounds, or 4,536 kilograms minimum.
- Cold-drawn carbon and alloy—5,000 pounds minimum or 125 feet minimum, 2,268 kilograms minimum or 38.1 meters minimum, whichever is greater.
- Quantity variation—standard ±10% of the ordered weight, or ±25 feet or 7.61 meters, whichever is greater.
Special Configurations
Tubular Products special seamless tubing configurations start with the highest quality steels. Grade, chemical analysis and surface condition are carefully considered, and production processes are tailored to achieve the best tubing for the end use.
The configurations are formed from round tube by cold drawing. The tube is drawn over a shaped mandrel or through a shaped die, or both. Improved tolerances, finishes and mechanical properties result.
The configurations are formed from round tube by cold drawing. The tube is drawn over a shaped mandrel or through a shaped die, or both. Improved tolerances, finishes and mechanical properties result.
Seamless and welded tubes for mechanical and general engineering applications. Tubes for construction and structural purposes such as civil structures, foundations, etc.
| Standard | Steel Grade | |
|---|---|---|
| EN | 10297 | E355 |
| 10210-1/2 | S235JRH, S275JOH, S275J2H, S355JOH, S355J2H | |
| 10219-1/2 | ||
| DIN | 1629/2448 | St-52 |
| ASTM | A500 | Gr. A, Gr. B |
| A501 | ||
| A618 | Gr. I, Gr. II, Gr. III | |
