DIN 2458 Standard applies to the dimensions and the conventional masses per unit length of welded steel pipes according to the technical conditions of delivery as stipulated in DIN
1628 Part 1 to part 4, DIN 17172 and DIN 17177. St37.2 welded pipe also applies to other technical conditions of conditions of delivery in which reference to DIN2458 standard is made.
1628 Part 1 to part 4, DIN 17172 and DIN 17177. St37.2 welded pipe also applies to other technical conditions of conditions of delivery in which reference to DIN2458 standard is made.
Chemical composition | ||||||||
Steel grade | Type of deoxidation (RR.fully killed) | Chemical composition, % by mass | Addition of nitrogen fixing elements (e.g.no less than 0.020% Al total) | |||||
Symbol | Material number | C | Si | N | P | S | ||
max | max | |||||||
St 37.2 | 1.0037 | RR | 0.17 | -- | 0.009 | 0.050 | 0.050 | -- |
Mechanical property
Mechanical property | |||||||||
Steel grade | Upper yield stress Reh for wall thickness in mm | Tensile N/mm2 | Elongation after A5 | Impact ISO V-notch test pieces at+20°C | |||||
Symbol | Material number | Up to 16 | 16-40 | 40-65 | longitudinal | transverse | longitudinal | transverse | |
N/mm2 min | % min | / min | |||||||
St 37.2 | 1.0037 | 235 | 225 | 215 | 340 to 510 | 17-26 | --- | 27 | -- |
It defines that sector, selected from DIN ISO 4200, within which welded steel pipes are standardized.It does not apply to precision steel tubes according to DIN 2393 and DIN 2394.
Chemical composition | ||||||||
Steel grade | Type of deoxidation (RR.fully killed) | Chemical composition, % by mass | Addition of nitrogen fixing elements (e.g.no less than 0.020% Al total) | |||||
Symbol | Material number | C | Si | N | P | S | ||
max | max | |||||||
St 37.2 | 1.0037 | RR | 0.17 | -- | 0.009 | 0.050 | 0.050 | -- |
Mechanical property
Mechanical property | |||||||||
Steel grade | Upper yield stress Reh for wall thickness in mm | Tensile N/mm2 | Elongation after A5 | Impact ISO V-notch test pieces at+20°C | |||||
Symbol | Material number | Up to 16 | 16-40 | 40-65 | longitudinal | transverse | longitudinal | transverse | |
N/mm2 min | % min | / min | |||||||
St 37.2 | 1.0037 | 235 | 225 | 215 | 340 to 510 | 17-26 | --- | 27 | -- |
It defines that sector, selected from DIN ISO 4200, within which welded steel pipes are standardized.It does not apply to precision steel tubes according to DIN 2393 and DIN 2394.